Professor

HOME > PEOPLE > Professor
Myoung-Gyu LEE Associate Professor, Ph.D Department of Materials Science and Engineering Seoul National University
Address.
1 Gwanak-ro, Gwanak-gu, Seoul 08826, Korea
Email.
myounglee@snu.ac.kr
Tel.
+82-2-880-1711
Fax.
+82-2-885-9671
Mail stop.
33-309
Homepage
https://sites.google.com/site/myounggyulee/home
  • Chair of 39th IDDRG annual conference, June 7-11, 2020, Busan, Korea
  • Editorial advisory board of International Journal of Plasticity
  • Editor of Int Journal of Automotive Technology, Metals and Materials International

Education

  • Ph.D. Materials Sci. & Eng. (adviser: Prof. Kwansoo Chung), Seoul National University, Seoul, Korea, 2004
  • M.S. Seoul National University, Seoul, Korea, 1999
  • B.S. Seoul National University, Seoul, Korea, 1997

Professional experience

  • Associate Professor, Seoul National University, March 2018 - present
  • Associate Professor, Korea University, Sept. 2014 - Feb. 2018
  • Adjunct Professor, GIFT, POSTECH, March 2015 - present
  • Associate Professor, POSTECH, September 2013 - Aug. 2014
  • Assistant Professor, POSTECH, March 2010- Aug. 2013
  • Adjunct associate Professor, Mechanical Engineering Dept., POSTECH, 2014-Aug. 2014
  • Adjunct associate Professor, ITAF ERC Center, Pusan National University, Sept. 2012 - present
  • Visiting scientist, POSCO R&D Lab, Sept. 2011 - Feb. 2012
  • Senior Researcher, Korea Institute of Materials Science, May 2007-Feb. 2010
  • Post-doc. researcher, Ohio State University, Oct. 2004-April 2007
  • Post-doc. fellow, Seoul National Univ., March 2004-Sept. 2004   

Honors/Awards

  • Jinhap Best Paper Award (진합학술상), with Drs. H.J. Bong and J.W. Lee, In the KSTP Spring Conference, Korean Society of Technology for Plasticity, May 2019
  • CALPHAD Best Paper Award for the best manuscript published in the CALPHAD journal in the year of 2018, "Computer-aided alloy designs of grade 600 MPa reinforced steel bars for seismic safety based on thermodynamic and kinetic calculations: overview" by J-H Shim, B.Hwang, M.G. Lee, J. Lee, Vol. 62, Sept. 2018, pages 67-74
  • POSCO Young Researcher Award (POSCO 젊은철강상), Korea Institute of Metals and Materials (KIM), April 25, 2019
  • 2017 MMI-Springer Award, Metals and Materials Int., Korea Institute of Metals and Materials (KIM), October 2017
  • 2016 Best Teaching Award, 2nd semester, 2016 (석탑강의상), President of Korea University, 2016
  • Best Presentation Award, Korea Society for Automotive Engineers (KSAE), KSAE Spring conference, May 2016
  • Inclusion of Who's Who in the World 2016-2018
  • Good Reviewer Award, Metals and Materials Int., Korea Institute of Metals and Materials (KIM), December 2014
  • 2014 International Journal of Plasticity (IJP) Award for "Excellent contributions to the field of plasticity over a period of five years (2008-2013), especially to the area of anisotropic hardening modeling and dislocation density based crystal plasticity", January 2014, The Bahamas
  • 2013 Notable Paper Award, Metals and Materials Int., Korea Institute of Metals and Materials (KIM), April 2013
  • 1st KSTP Young Scientist Award, Korean Society of Technology for Plasticity, May 2012
  • Distinguished Achievement Award, NUMISHEET 2011 International Conference, August 2012
  • Best Poster Award, KSTP, Oct. 2010
  • Excellent Poster Award, KIM, April 2009
  • Brain Korea 21 Exchange Student Fellowship, Feb. 2001 - July 2001

Professional societies

Memberships
  • American Society for Mechanical Engineers (ASME)
  • Korean Society of Automotive Engineers (KSAE)
  • Korean Institute of Metals and Materials (KIM)
  • The Minerals, Metals and Materials Society (TMS)
  • Korean Society for Technology of Plasticity (KSTP)
Editorial Board Membership
  • Editorial advisory board, International Journal of Plasticity (SCI), 2018-
  • Editorial board, Applied Sciences, Mechanical Engineering section (SCIE), 2018 -
  • Editorial board, Korean Journal of Metals and Materials (SCIE) 2018 -
  • Editor, Int J Automotive Technology (SCI), 2017 - 2019
  • Guest editor, Metals, Advances in Materials Forming (SCIE), 2017
  • Guest editor, International Journal of Plasticity (SCI), October 2015
  • Editorial board, Journal of Applied Mathematics, 2014 -
  • Editor, Transactions of Materials Processing, 2013 -
  • Editorial board, Metals and Materials International (SCI), 2012 -
  • Editorial board, Trends in Metals & Materials Engineering (재료마당), 2017 -
  • Editorial board, Journal of Mechanical Engineering, 2011 -
  • Editorial board, Transactions of Materials Processing, 2007 - 2013

Services

International
  • Reviewer, NSERC (Natural Sciences and Engineering Research Council of Canada) Collaborative Research and Development or Industrial Research Chair proposal
  • Advanced processing of materials, Symposium organizer, PRICM-10 (Pacific Rim Inter. Conf. on Materials),2019, Xian, China
  • Scientific committee member, The 13th International Conference on Numerical Methods of Industrial Forming Process (NUMIFORM 2019)
  • Scientific committee member, TubeHydro 2019, Nov. 2019, Twain
  • Scientific committee member, IDDRG (International Deep Drawing Research Group) 2019, June 2019, The Netherlands
  • Keynote speaker, Plasticity 2019, Jan. 2019, Panama city, Panama
  • Local organizing committee member, International Conference on Advanced Steels (ICAS) 2018, Nov. 2018, Jeju, Korea
  • Invited speaker, AEPA2018, Jeju, Korea
  • Scientific committee member, AEPA 2018, Dec. 2018, Jeju, Korea
  • Scientific committee member, IDDRG (International Deep Drawing Research Group) 2018, June 2018, Canada
  • Keynote speaker in Asia Steel 2018, India
  • Organizer of a symposium in NUMISHEET 2018, "Kwansoo Chung Memorial Symposium - Mechanics in Materials Forming", Tokyo, Japan, August 2018
  • Scientific committee member, NUMISHEET 2018, August 2018, Japan
  • Co-organizer of a symposium in 2018 TMS Annual Meeting & Exhibition, "Building an ICME Infrastructure: Developing Tools that Integrate Across Length and Time Scales to Accelerate Materials Design", USA
  • Keynote speaker in AWMFT 2017, Oct. 15-17, Pohang, Korea
  • Organizing committee member, the 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017), Oct. 15-17, 2017, Pohang, Korea
  • International Scientific Committee Member, Asia Pacific Symposium on Technology of Plasticity, Nov 22-25, 2017, Taiwan
  • Scientific committee member, Tubehydro 2017, November 2017, Bangkok, Thailand
  • Co-organizer of a symposium in IDDRG 2017, "Materials Modelling and Testing for Sheet Metal Forming", 2/07/2017 - 6/07/2017, Technical University of Munich (TUM), Munich, Germany (planned)
  • Co-organizer of a symposium in 2017 MS&T, "Shaping and forming of advanced high strength steels II", 10/08/2017 - 10/12/2017, Pittsburgh, PA, USA
  • Co-organizer of a mini-symposium in Plasticity 2017, "Constitutive Modeling of Plasticity and Strategies for Bridging the Various Length Scales", Jan. 3 - 9, Puerto Vallarta, Mexico
  • Keynote speaker, Session Chair in Plasticity 2017
  • Invited Speaker, Executive Track at FISITA 2016 World Automotive Congress, September 26-30, Bexco, Busan, Korea
  • Co-organizer of a symposium in 2016 TMS Annual Meeting & Exhibition, "Material Behavior Characterization via Multi-Directional Deformation of Sheet Metal", 2/14/2016 - 2/18/2016, Nashville TN, USA
  • Co-organizer of mini-symposium at 12th World Congress on Computational Mechanics (WCCM 2016), "Computational modeling of avaned matrial forming", July 24-29, 2016, Seoul, Korea
  • International Publicity Co-chairs, ICMAE 2016, July 18-20, 2016, London, UK
  • Scientific committee member, NUMISHEET 2016, September 2016, UK
  • Scientific committee member of symposium in NUMIFORM 2016, July 2016, Troy, France
  • Scientific committee member, TubeHydro2015, Oct. 2015, Xian, China
  • Scientific committee member, ICMAE 2015, July 16-18, Rome, Italy
  • Organizer of a symposium in ASME 2015 Applied Mechanics and Materials Conference (McMat 2015), "Experiments and Constitutive Modeling of Materials in Advanced Forming Processes", Seattle, WA, USA, June 29-July 1, 2015
  • Co-organizer of a symposium in Materials Science & Technology 2015 (MS&T 2015), "Shaping, forming, and modeling of advanced high strength steels", Columubs, OH, USA
  • Keynote speaker, The 7th Forming Technology Forum, September 15-16, 2014, Enschede, The Netherlands
  • Member of Shaping & Forming Committee, TMS, 2014-
  • Reviewer, National Priority Research Program (NPRP), Qatar National Research Fund, Qatar Foundation, 2013-
  • Co-organizer of mini-symposium at 11th World Congress on Computational Mechanics (WCCM 2014), "Advances in Constitutive Modeling of Metal Forming Processes across Different Length Scales", 2014.7.20-25, Barcelona, Spain
  • Co-organizer of mini-symposium at 17th U.S. National Congress on Theoretical & Applied Mechanics, " Advances in Constitutive Modeling of Metal Forming Processes across Different Length Scales", 2014. 6.15-20, MI, U.S.A.
  • Organizing committee member, The 6th International Conference on High Speed Forming (ICHSF 2014), 2014. 5. 27-29, Daejeon, Korea
  • Organizer of mini-symposium at Plasticity 2014, "Plasticity from nano-scale to continuum", 2014.1.3-8, the Bahamas
  • Conference secretariat, local organizing committee member, Tubehydro2013, Jeju, Korea, 2013. 8. 23
  • Session chair of Material Processing Division, NRF-NSF joint symposium on advanced manufacturing, Pohang, Korea, 2013.5.15-16
  • Scientific committee member, The 11th International Conference on Numerical Methods of Industrial Forming Process (NUMIFORM 2013), 2013.7
  • Session chair of Plasticity 2013, Nassau, the Bahamas, 2013.1
  • Technical program committee, 2nd Global Conference on Materials Science and Engineering, Xianning, Hubei province, China, 2013.11.20-22
  • Referee, Research Foundation-Flanders (Belgium) (Fonds Wetenschappelijk Onderzoek-Valaanderen, FWO), 2012
  • Publication/Benchmark committee member, The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), 2011.8
  • Keynote speaker of mini-symposium, Session chair in ESAFORM 2011, Belfast, UK
  • Representative of IDDRG (International Deep Drawing Research Group) for Korea, 2010 -
  • Local organizing committee member, The 10th International Conference on Numerical Methods of Industrial Forming Process (NUMIFORM 2010), 2010
  • Local Scientific Committee memebr, Asia-Pacific Conference on Engineering Plasticity, 2008
Domestic
  • Secretary of general affairs (총무간사), Korean Institute of Metals and Materials (KIM), 2018 -
  • Core reviewer, National Research Foundation of Korea, 2017-
  • Board of reviewer for Technology Innovation (산업기술혁신평가단 평가위원), 2016-
  • Executive board member for international affairs (국제이사), Korean Society for Technology of Plasticity, 2013 -
  • Executive secretary of editorial board (편집이사), Korean Society for Technology of Plasticity, 2013 - 2014
  • Secretary, Sheet Metal Forming Division in KSTP, 2009 - 2012
  • Secretary of general affairs, Manufacturing & Materials Division, The Korean Society of Automotive Engineers (KSAE), 2011 -
  • Advisory board of Metal Forming division of KITECH, 2011 -
  • Program orgamizer of KSAE 2011 Conference, Manufacturing & Materials Div., KSAE, 2011, 2012
  • Lecturer, POSCO family Education Institute: Mechanical properties of metals, 2011 - 2012

Research

Current research interests
  • Composites Melchanics
  • FE modeling for novel anisotropic hardening model
  • Ductile fracture modeling of light weight alloys and AHSS
  • Modeling friction stir welding
  • Modeling of strain path change effect
  • Nonlinear elastic unloading behavior of AHSS - measurement and simulation
  • Cyclic material behavior - New material test machine (T/C or Simple shear type)
  • Surface roughening of ferrtic SS - Crystal plasticity approach
  • Hot press forming - TWB approach / FE modelling with advanced constitutive model
  • Meso-scale simulation of DP/TRIP steels - micromechanical modeling
  • Anisotropy of AHSS - novel measurement
  • Dislocation density based crystal plasticity
  • Formability - Crystal plasticity approach
  • High strain rate deformation