Publications

Materials mechanics laboratory

[355] Modeling the transition from ductile to brittle fracture induced by hydrogen-assisted mechanical degradation in quenching and partitioning (Q&P) steel

Geonjin Shin, Jinheung Park, Sang Yoon Song, Kijung Kim, Hye-Jin Kim, Seok Su Sohn, Myoung-Gyu Lee

2025

Engineering Fracture Mechanics Volume 328, 10 November 2025, 111491

[354] Data-driven modeling of the plastic anisotropy of sheet metal with an investigation of its material symmetry based on cylindrical cup drawing experiments

Stefan C. Soare, Seonghwan Choi, Myoung-Gyu Lee

2026

Computers & Structures Volume 320, January 2026, 108011

[353] Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine

Wonjong Jeong, Jeongho Yang, Joon Phil Choi, Ji Yong Hwang, Young Won Kim, Seong Je Park, Jae Won Choi, Woongbeom Heogh, Hoyoung Lee, Jinsoo Park, Min-Kyo Jung, Ji Eun Lee, Ho Jin Ryu, Tae-Sik Jang, Hyun-Do Jung, Mohammad Jahazi, Jubert Pasco, Myoung-Gyu Lee, Hyejin Park, Seung Ki Moon, Rigoberto C. Advincula, Sang Hoon Kim & Clodualdo Aranas Jr.

2025

Adv Compos Hybrid Mater 8, 420 (2025)

[352] Microstructure diversification and strength–ductility relationship in extruded Mg-9Gd-5Y-0.5Zr via controlled extrusion parameters

Wenjie Wu, Xiaoyu Wang, Wenzhen Chen, Daqing Fang, Jiabin Hou, Wencong Zhang, Myoung-Gyu Lee

2025

Journal of Alloys and Compounds Volume 1044, 5 November 2025, 184510

[351] Formability of PET/PA/Al/PP laminated composite pouch for Li-ion battery: Analysis based on experiments and modeling

Chanmi Moon, Jung hyeon Park, Junhe Lian, Hyung Lim Lee, Jun Ma, Myoung-Gyu Lee

2025

Journal of Power Sources Volume 653, 15 October 2025, 237746

[350] Anisotropic plasticity identification: Integrated FE and sensitivity-based virtual fields method

Seojun Hong, Hyunki Kim, Myoung-Gyu Lee

2025

International Journal of Mechanical Sciences Volume 306, 15 November 2025, 110815

[349] Constitutive modeling of nonlinear, anisotropic, time-dependent polymer friction composites

Youngjae Kim, Taehyun Kim, Hyunki Kim, Jung Yun Won, Gyu-Jang Sim, Myoung-Gyu Lee

2025

International Journal of Mechanical Sciences Volume 305, 1 November 2025, 110737

[348] Particle-assisted texture engineering for achieving exceptional bendability of Cu–Ni–Si alloy

Kyung Mun Min, Sang Hun Shim b, Sang Jin Lee, Eun-Ae Choi, Seung Zeon Han, Hyuk Jong Bong, Myoung-Gyu Lee, Jee Hyuk Ahn, Heung Nam Han

2025

International Journal of Mechanical Sciences Volume 305, 1 November 2025, 110741

[347] Crystal plasticity model for predicting ductile fracture in cast Al alloy

Hyuk Jong Bong, Woojin Jeong, Kyung Mun Min, Chanyang Kim, Jinwoo Lee, Myoung-Gyu Lee

2025

International Journal of Mechanical Sciences Volume 304, 15 October 2025, 110697

[346] Integrated polycrystalline plasticity–cellular automaton model for microstructure evolution driven by discontinuous dynamic recrystallization during thermo-mechanical processing of magnesium alloys

Wenjie Wu, Jinheung Park, Wenzhen Chen, Guowei Zhou, Seo Yeon Jo, Peike Yang, Chao Cui, Wenke Wang, Myoung-Gyu Lee

2025

International Journal of Plasticity Volume 193, October 2025, 104437

[345] Effect of loading conditions and geometric factors on plasticity in complex concentrated alloys with various deformation mechanisms

Jeongwon Yeh, Hyun Gi Min, Myoung-Gyu Lee, Eun Soo Park

2025

Materials & Design Volume 257, September 2025, 114396

[344] Non-Destructive Integrity Assessment of Austenitic Stainless-Steel Membranes via Magnetic Property Measurements

Haeng Sung Heo, Jinheung Park, Jehyun You, Shin Hyung Rhee, Myoung-Gyu Lee

2025

Materials 2025, 18(12), 2898

[343] Multi-scale friction model for automotive brake system incorporating tribological effects of surface asperities

Jung Yun Won, Hyungjo Seo, Youngjae Kim, Hoejeong Jeong, Joonseok Kyeong, Woojeong Oh, Myoung-Gyu Lee

2025

Materials & Design Volume 256, August 2025, 114239

[342] Modeling hydrogen diffusion and its interaction with deformed microstructure involving phase transformation: Theory, numerical formulation, and validation

Jinheung Park, Geonjin Shin, Kijung Kim, Taejoon Park, Farhang Pourboghrat, Seok Su Sohn, Myoung-Gyu Lee

2025

International Journal of Plasticity Volume 191, August 2025, 104377

[341] Surface hardening of ductile austenitic lightweight steel through powder bed fusion 3D printing

Joonoh Moon, Hyun-Uk Hong, Hyungkwon Park, Hyo-Haeng Jo, Seong-Jun Park, Chansun Shin, Heung Nam Han, Myoung-Gyu Lee, Jae Suk Jeong, Bong Ho Lee, Chang-Hoon Lee

2025

Journal of Materials Research and Technology Volume 36, May–June 2025

[340] Finite element modeling of springback behavior for aluminum 6000 series sheets using three point bending tests

Hyuk Jong Bong, Jinwoo Lee & Myoung-Gyu Lee

2025

Int.J Automot. Technol. (2025)

[339] Strain rate effect on edge formability of complex-phased advanced high strength steels in the hole expansion test

Hwigeon Kim, Jong Youn Park, Hyounyoung Lee & Myoung-Gyu Lee

2025

J. of Materi Eng and Perform (2025)

[338] Integrated experimental and numerical investigation of fracture onset in automotive components using finite element analysis

Seojun Hong, Jinwoo Lee, Joonseok Kyeong, Jung Yun Won, Woo Jeong Oh, Myoung-Gyu Lee

2025

Materials & Design

[337] An enhanced shear-lag model considering temperature-dependent whisker fracture and de-bonding mechanism for TiB whisker-reinforced titanium matrix composites

Jiahui Guo, Wenzhen Chen, Yong Hou, Ke Wei, Changjing Zhang, Jiabin Hou, Yi Cao, Guorong Cui, Wencong Zhang, Myoung–Gyu Lee

2025

Composite Structures Volume 366, 15 August 2025, 119222

[336] Temperature dependent dynamic restoration mechanisms in Ti-6Al-4V during isothermal deformation across α + β phase regions

Seo Yeon Jo , Jinheung Park, Yeontae Kim, Myoung-Gyu Lee

2026

Journal of Materials Science & Technology Volume 240, 1 January 2026, Pages 250-278

Materials Mechanics Laboratory서울대학교 재료역학연구실

Publications

Paper

[355] Modeling the transition from ductile to brittle fracture induced by hydrogen-assisted mechanical degradation in quenching and partitioning (Q&P) steel

[354] Data-driven modeling of the plastic anisotropy of sheet metal with an investigation of its material symmetry based on cylindrical cup drawing experiments

[353] Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine

[352] Microstructure diversification and strength–ductility relationship in extruded Mg-9Gd-5Y-0.5Zr via controlled extrusion parameters

[351] Formability of PET/PA/Al/PP laminated composite pouch for Li-ion battery: Analysis based on experiments and modeling

[350] Anisotropic plasticity identification: Integrated FE and sensitivity-based virtual fields method

[349] Constitutive modeling of nonlinear, anisotropic, time-dependent polymer friction composites

[348] Particle-assisted texture engineering for achieving exceptional bendability of Cu–Ni–Si alloy

[347] Crystal plasticity model for predicting ductile fracture in cast Al alloy

[346] Integrated polycrystalline plasticity–cellular automaton model for microstructure evolution driven by discontinuous dynamic recrystallization during thermo-mechanical processing of magnesium alloys

[345] Effect of loading conditions and geometric factors on plasticity in complex concentrated alloys with various deformation mechanisms

[344] Non-Destructive Integrity Assessment of Austenitic Stainless-Steel Membranes via Magnetic Property Measurements

[343] Multi-scale friction model for automotive brake system incorporating tribological effects of surface asperities

[342] Modeling hydrogen diffusion and its interaction with deformed microstructure involving phase transformation: Theory, numerical formulation, and validation

[341] Surface hardening of ductile austenitic lightweight steel through powder bed fusion 3D printing

[340] Finite element modeling of springback behavior for aluminum 6000 series sheets using three point bending tests

[339] Strain rate effect on edge formability of complex-phased advanced high strength steels in the hole expansion test

[338] Integrated experimental and numerical investigation of fracture onset in automotive components using finite element analysis

[337] An enhanced shear-lag model considering temperature-dependent whisker fracture and de-bonding mechanism for TiB whisker-reinforced titanium matrix composites

[336] Temperature dependent dynamic restoration mechanisms in Ti-6Al-4V during isothermal deformation across α + β phase regions