Instron 8801
Maximum load: 10 ton (10,000 kgf) UTM
Hydraulic (automated) gripping system
High-temperature furnace available (up to ~350 °C)
Equipped for various tests including 3-point bending and compression
Supports cyclic and creep testing
Compatible with DIC camera systems
Contact : Hyeongseo Kim (tardando01@snu.ac.kr)
Location : Building 30, Room 412
Instron 5942
Maximum load: 1 kgf UTM
Pneumatic (automated) gripping system
Equipped for 3-point bending and similar mechanical tests
Compatible with DIC camera systems
Contact : Junghyeon Park (jhoo707@snu.ac.kr)
Location : Building 30, Room 412
MTDI MINOS-100
Maximum load: 10 ton (10,000 kgf) UTM
Mechanical (automated) gripping system
High-temperature furnace available (up to ~350 °C)
Equipped for various tests including 3-point bending, compression, and VDA-standard testing
Supports cyclic and creep testing
Contact : Minkwang Baek (baekmk12@snu.ac.kr)
Location : Building 30, Room 317
Nakajima Forming Tester (MTDI)
Forming Limit Diagram (FLD) testing available
Compatible with DIC camera systems
Equipped with various specimen shapes including rectangular blanks for forming tests
Contact : Junghyeon Park (jhoo707@snu.ac.kr)
Location : Building 30, Room 412
Heat Treatment Furnace (S-HOV 252)
Inner dimensions: 700 × 600 × 600 mm³
Outer dimensions: 1420 × 899 × 1024 mm³
Maximum temperature: ~300 °C
Contact : Minkwang Baek (baekmk12@snu.ac.kr)
Location : Building 30, Room 412
High-Temperature Tensile Tester (Shimadzu)
Maximum load: 10 ton (10,000 kgf) UTM
Capable of high-temperature tensile testing (up to ~900 °C)
Mechanical (automated) gripping system
Contact : Hyeongseo Kim (tardando01@snu.ac.kr)
Location : Building 30, Room 412
DIC (Digital image correlation)
Equipped with 4 cameras, various lenses, and camera stabilization accessories
Products from Correlated Solutions
Licensed software for VIC-3D imaging and analysis
Contact : Junghyeon Park (jhoo707@snu.ac.kr)
Location : Building 30, Room 412
Workstation
Up to 64 cores (Intel, AMD)
Total of 10 workstations available
Contact : Geonjin Shin (rjswls1143@snu.ac.kr)
Location : Building 30, Room 523
Software
Simulia ABAQUS
Ansys Suite (including LS-DYNA, Ansys Fluent, etc.)
Deform 3D
Simufact
Contact : Geonjin Shin (rjswls1143@snu.ac.kr)
Location : Building 30, Room 523
